Saturday, October 9, 2010

Neosteel

After 3 months of waiting the belt finally arrived but with a little problem. The hipband appears too small for my current hip and it causes terrible pain and pressure on my hip as i tried to wear the chastity. I then asked the manufacturer on recommended solution. After a few bending, the hip band is still far too small to accommodate my hip without any discomfort. Neosteel asked me to send the hip-band back to him so he can make some alterations to the hipband.

So right now I've sent the hipband to Neosteel and hopefully he will send a new hipband back to me by early November. So another month of waiting.

Conclusions is that DO NOT TAKE MEASUREMENTS WRONGLY FOR CUSTOM MADE CHASTITY ELSE IS A PAIN to wait for it again.

Monday, September 27, 2010

Waiting time

after i place the order, there nothing much I can do now except for waiting for the neosteel to arrive. In the meantime, I have 6-8 weeks of freedom. Lol means more cumming heheh.

Neosteel

After all those chastity research, Neosteel seems to be the best options and I decided to go ahead and ordered the neosteel. After several chat with Dr Mende Reinholds, the owner of Neosteel, he been very helpful. I ordered the new Masterpiece series from neosteel and is called the Masterpiece Neosteel Male Hip chastity belt. The masterpiece series do not have any lining which makes it suitable for long term wear without having to worry about lining wearing off or skin rashes/irritation or anything later in the future.
The neosteel is a system module which comes in several parts. It have a hipband and the crotch shield. One thing good about system module is that, it can be combine with other neosteel system series such as sports version, the arch and so on.
I ordered, comes with a hipband, a crotch shield, a climate penis tube, electro anal dildo, TENS unit, seal bolt.
After I put in the order, Neosteel asked me to take measurements using the measuring kit I order earlier. I took the measurements again and again ensuring it correct. I then confirm measurements with Neosteel and made the payment.
Neosteel replied back and said the delivery will takes 6-8 weeks after payment confirmation and receipts. 

Sunday, September 26, 2010

Switching from My-steel to a Neosteel

July 2010, I decided to buy a neosteel after doing some extensive research and review about neosteel. Neosteel is a well-known manufacturer and from all the reviews I read, Neosteel seems to be the best options without having to go personally to Germany to get it measured. I quickly ordered the measuring kit after I sold the My-steel off.
The measuring kit comes with a instructional video on how to take measurements. I compared the measurements with My-steel's measurements, there no major difference with couple of inches difference here and there.
Neosteel recently released their Masterpiece collection which comes completely without lining. I quickly gave it a thought. The masterpiece would best suits me as I will not have to worry about lining coming off, rashes or anything to do with silicone. Before I even decided on Neosteel, I looked at several options include the USA maker Locked in Steel, the new maker of composite ChastityWear, Latowski and Reinholds.
I read many reviews that the locked-in-steel customer's service is poor and their belt is not that great so it been crossed out from my list. On the other hand, Chastitywear looks promising with their design to be slightly same as the Reinholds maker in Germany but after several months, there is no production news from ChastityWear so that options was also crossed out from the list.
I then stumble on a used Latowski for sale with a price tag similiar to a new Latowski. The seller is looking for $900 pounds for it and a brand new one will cost $1200 pound. The used Latowski measurements pretty close to my measurements, therefore I emailed the seller asking for measurements and photos of it. The seller is unable to suppply me with more info and no pictures for me to have a look, therefore I crossed out that option too. To get a brand new latowski or Reinholds requires personal visit to their workshop in Germany which I don't have the $$ to make that trip so both options was also crossed out.
I left Neosteel on my list and it seems is the best solution for now. Therefore I decided to go with Neosteel instead of other manufacturer.

My-steel cont

With the silicone liner, I also have one problem while wearing the CB. I always have some sort of skin irritation problem and I developed rashes while wearing the CB. The rash is not bad when I wear the CB in cold climate country like Australia but it poses a major problem to me when I decided to wear the CB back to Malaysia and then to Indonesia for a holiday. Back in hot and humid country I sweat a lot the rashes got worse and I have to take the CB off and have to go to the doctor and get some medication. I have this CB for nearly a year and decided to sell it off in mid December 2009. Then I remain unlocked for nearly a year thinking whether I want to be locked in chastity or not. I took a year slowly decide and search for an ultimate CB which I can be locked long-term in it.
Sadly I lost most of the My-steel shots I took during my time in it. Those few pictures I had is my only memory of it. 

My-steel cont

My-steel is like a path towards a full belt for me and also an experimental one. Before ordering the CB, I think I somehow took the measurements wrongly on the hip size and the length between front to the rear center of the CB. As a result of that, the CB is not a snug fit but it did do its job of keeping me safely locked up until one day when I decided to try something to it which is pulling out. AS mentioned before, since the hip band is not tight enough due to the possibility that I lost some weight or took the wrong measurements, I managed to pull my cock out from the steel tube. After pulling out, of course I cannot put my cock back in afterwards, it fails it purpose from then on.
And by the way the anus hole measurements is also not quite right. When I have to do big business, it will stain the anus hole and its surrounding which makes cleaning after the business is hard unless i shower right after that.
Locked in My-Steel as of 18/08/2009. One year before I order the neosteel

My-steel cont

The craftsmanship was good as expected but there a problem. Unlike Neosteel which make their CB impossible for the user to touch the tip of the penis, not in the case of the My-steel, it is possible to touch the tip of penis which makes this CB is not as secure as it claims to be. Putting a vibrator or a finger at the tip of the penis will make it sensitive enough for a chance to cum.

My-steel under jockstrap

Changed from Cb6000 to a steel belt


Around June 2008, while I surfing for chastity manufacturer, I accidently stumble across a new chastity maker called My-Steel chastity. A German based company and the products offered by them are very much similar to the Neosteel. My-steel design looks pretty good and the price is cheaper than Neosteel of course. My-steel offered several choice of coloured lining unlike Neosteel which only have black lining. I quickly make up my mind and ordered myself and My-steel comfort system as shown in the picture below.
A sample view of my previous my-steel chastity

This is the My-steel comfort system with anus hole and it cost around $800-1000 USD

Cb6000 cont

That not a solution which I wanted. Therefore I tried the 3rd largest ring. Problem solved cannot pull out my cock anymore but at night, my balls are in agonizing pain due to lack of blood flowing into my balls. My ball turns purple after a while when sleeping. The pain is so unbearable and therefore I have to take the CB off. I lost the motivation to wear it after that and decided to sell it off.

CB6000

The CB6000 arrives in a shinny pouch from Mr. S Leather. From my experience, the CB6000 is much comfortable than the CB3000 because the manufacturer changed the ring from a hinged ring to a solid ring. Since I have experience with CB3000 before, it was easy for me to figure it out which spacer and ring to put on. I managed to stay locked in it for quite some time before I discovered that CB6000 is also one of the ‘toy’ not some serious chastity. I used the 3rd largest ring all the times with the shortest spacer. Several months after using the CB6000, in one horny night, I played with the CB6000 and suddenly I just cum while still in CB6000. That a big disappointment. I only put the CB one when I feels like it and never been locked more than few days cause I know is not secure anymore. Then I decided to see if I can pull-out like I managed with the CB3000. And tell you what, CB6000 is just like CB3000. With a little lube I can pull my cock out from the cage although is the 2nd ring with the smallest spacer. I can even put my cock back into the cage afterwards.
A picture of me using the Cb6000

Exobelt X1

The following year, while I was browsing the internet, I found another chastity maker called Exobelt. After reading several reviews on the product, I decided to order the Exobelt X1. After I received this product, I tried to wear it and I found out that I cannot fit into the Exobelt. Somehow I cannot seems to put the balls and penis together and lock both piece together without pinching the skin. I spend 1hr trying to put the Exobelt on but eventually I gave up. Sold the Exobelt off few months later. Towards the end of 2007, the manufacturer for CB3000 came out with another product called CB6000. As the product is relatively new, I decided to try CB6000 because is different than CB3000 and solid ring.

CB3000 cont

I can feel the skin burning and I have no choice but to take the CB off and give my balls a rough check. There slight rashes near the skin. I was too reluctant to wear it anymore after the incident. On some occasions, I would put the CB back on no longer than 36 hours. Again I found one more problem is that I can pull-out from the device when my penis is soft. Eventually I sold the CB off cause there no point keeping it.

Cb3000 first night

That night I barely slept at all because I’m very conscious with a CB locked around my cock. The next morning, I took the CB off and inspect my balls and cock to make sure that everything is all right. After shower, I put the CB back on and decided to try it for few days till my body get used to it.

It takes about 3 days for my body to fully get used to the CB around my cock and balls. Then I notice another problem with the CB is that, the hinged CB3000 ring makes the skin under my scrotum very uncomfortable.

Chastity journey

My fantasy for chastity began when I’m 20 years old. Ever since then, I dreamt of being locked in chastity and have someone to hold the key to my chastity. My first chastity which I bought in 2006 was a CB3000. As I’m relatively new to chastity, although I have been researching it over the Internet, I was still a novice. As I mentioned earlier I bought a CB3000 from an online shop in the States. Few days later a package arrives with a brand new CB3000 in it. I got excited and I began to try putting on the CB. I experiment with a different spacer and rings till I find a match. After several hours, I finally find a match that suits me. Tried the first night in CB3000 and it was a strange experience having my cock locked up for the first time.